Presentation of a fire prevention product to be put up for sale on the Turkey market has been made to Akhisar Municipality Fire Department and Forest Department on an outdoor land.

Presentation of the Fire prevention product is made!

Kenan MOLLA

Presentation of a fire prevention product to be put up for sale on the Turkey market has been made to Akhisar Municipality Fire Department and Forest Department on an outdoor land.
During the field exercise attended by Adnan Selvi, Head of the Akhisar municipality Fire Department; Salim Gümüş, Assistant Manager of the Forrest Department and Murat Kabasakal, owner of Akhisar Yapı Tasarım, it has been noticed that the fire that was started on a given space had naturally extinguished when arrived to the area where the product had been applied. Ali Rizelioğlu, spokesperson of the Turkey distributor denoted that they previously performed field trainings on forests in the black sea region and that they got good results.    

’’ISFR-3 Shield, which is a fire retardant product, is a multipurpose, wide spectrum, colorless, odorless, quick release, A class fire extinguisher. It is not toxic or allergic and it provides highly effective fire retardant protection. It does not contain any noxious ingredient. Independent test results prove that ISFR-3 provides A class fire retardant protection and that it is used all over the USA by fire safety policy appliers. 

It is easily applicable to textile, lumber, wood products, carpet, decorative products suitable to make curtain,  paper, display windows, stage curtains, beds, mattresses, and many other products and it is an ideal fire retardant product. 

The fire spreads when the temperature of the heat source reaches the flare up level. At the beginning, the spreading is limited to materials that are in direct contact with the flame.  However, when the temperature reaches 400 degrees, all flammable materials and gases flare up as result of a phenomenon called flashover. Flashovers happen in less than 3 minutes. Our product ISFR-3 drastically decreases fire hazards by significantly scaling up the flaring up level of flammable materials. This product can not be applied to all kinds of materials.ISFR-3 can only be applied over absorbent materials or over materials that allow silica adhesion. In other words, ISFR-3 can only penetrate into materials it can reach. As an easy testing method, a drop of water is put on the material and if the water doesn’t get a bead like shape ISFR-3 can be applied over this material.  

This product can be applied over plywood, scaffold floorboard, fiberboard, MDF plaques, OSB plaques, cork plaques, sponge plaques, panels, frames, mold, doors, carpets, curtains, natural and synthetic fabrics, paper and cartoons and many other materials. ISFR-3 is a cheap fire retardant method and it is possible to cover a space of about 12.5 square meter in textile depending on the fibers of the material and a space of about 7 square meter in lumber depending on the thickness of the lumber ‘’ said Ali Rizelioğlu, Ayyıldız  Chemicals’ spokesperson.

Benefits of ISFR-3 being explained to Turkish Code officials prior to test

ISFR-3 is being applied to perameter of test area

Product packaging being examined by code officials, the fact that it has no odor is commented on!

Question asked and answered reference to the non-toxic clean application

ISFR-3 being put into airless spray backpack sprayer is only one method of application

Paper flame test strip being ignited, top half was treated with ISFR-3

Treatment is hard to detect to the human eye without the aid of black light, the black light feeds back a phosphorus glow to the treated area.

When flame reached treated area, flame went out

Test sample is being ingnited

Simple airless spray application

ISFR-3 is applied to the permiter of test area

test area has been carefully marked out

the test area is being ignited

Anxious observers watch the untreated area in early stages of the burn

the untreated area is starting to burn at increasing rate

the flame wont cross over to the treated area

The area treated with ISFR-3 did not burn

The area that has burned is wet down for saftey after the completion of the test

the right side of these overalls are treated with ISFR-3

the untreated side continues to burn

Notice the treated area has resisted the intense flame

the treated side did not burn, the untreated side is totaly burned

---------------------------------------------------------------------------------------------------------------------------------------------------------------------

NORTHEAST FIRESHIELD FIRE RETARDANT PRODUCT INSPECTA-SHIELD IS EVALUATED BY THE ICC EVALUATION SERVICE AND RECEIVES ESR #2019

Application Satisfies Stringent Fire Codes & Results in Insurance Premium Reductions

Product Will Help Save Lives and Reduce and/or Eliminate Property Damage from Fire

(January 2007, Bohemia, New York) Inspecta-Shield™, a product from Northeast Fireshield of Bohemia, New York, has been recognized by ICC Evaluation Service as the only spray on fire retardant for compliance with the 2003 International Fire Code (IFC) as well as the 2003 International Existing Building Code (IEBC) for application on dimensional lumber and plywood. This recognition indicates the product "meets accepted criteria" and makes Inspecta-Shield™ the only Class "A" certified spray-on fire retardant product with this specified type application process in the country.

"We have been working diligently to have fire and building professionals accept what we already know," stated Robert Licata, Northeast Fireshield CEO, "that Inspecta-Shield™is the most effective fire retardant compound available on the market today for this approved use."

NORTHEAST FIRESHIELD FIRE RETARDANT PRODUCT INSPECTA-SHIELD IS EVALUATED BY THE ICC EVALUATION SERVICE AND RECEIVES ESR# 2019

It is supported by the existing New York City (MEA) Department of Buildings approval for treatment of dimensional lumber and plywood. The result is the Inspecta-Shield™ spray-on product and the certified application process is the only product/application process approved in compliance with the new code to achieve a Class "A" flame spread (25) or less.

Other agencies accepting Inspecta-Shield™ include Federal Aviation Administration (FAA), New York City Fire Department Certificate of Acceptance and the Office of the California State Fire Marshal - to mention only a few.

Inspecta-Shield™, a clear odorless liquid, that contains no hazardous materials, is a consumer friendly, green label Underwriters Laboratory Classified Product.

BOON TO RE-MODELERS AND BUILDERS

Under this new approval Inspecta-Shield™ may be applied on-site by a certified applicator trained by Northeast Fireshield to existing structures including framing, lumber, rafters, plywood paneling, flooring, sub-floors and moldings. Flame proofing certificates are issued stipulating compliance with the requirements of ASTM-84 Class "A" 25 or less flame spread. With this approval, restorations can be completed without tearing out existing wood structures by just spraying with Inspecta-Shield™ to bring the construction up to code. Both Commercial builders and homeowners utilizing the process can apply for insurance reductions that can result in discounts ranging from 10 percent to 30 percent depending on the extent of the wood treated.

Inspecta-Shield™ clients range from companies such as: Tulnoy Lumber, Chesler Plywood, Interstate Plywood, LeNoble Lumber Company - Liberty Wood Products - York Scaffold Company - Safway -- Scaffold Services Company - Metropolitan Transportation (MTA) - New York Office of Parks and Recreation - Fireproofing Company of America - Oheka Castle -- Kay Construction Corp.-- Kajima Construction - Mack Construction -- New York Museum of Natural History -- the NYC Metropolitan Opera -- Smithsonian Institute --NASA Space Agency, White Sands Facility --U.S. Embassies (Worldwide), --Stony Brook University --Suffolk County(NY) Jail DWI Facility --CESSNA Aircraft -- International Jet Interior -- Lockheed Aircraft Engineering,--Port Authority of New York and New Jersey. Complete list available upon request.

For Additional Information on Inspecta-Shield™including Internet Sales and Distributorships go to the Northeast Fireshield Web site: www.northeastfireshield.com.

ABOUT NORTHEAST FIRESHIELD

A privately owned corporation, founded in 1989, Northeast Fireshield is the distributor and licensed applicators for Inspecta-Shield™. The company has extensive experience in the fire retardant treatment of homes, commercial business including places of public assembly such as schools, colleges, restaurants, resorts, hotels, and airplane interiors. Services include dry cleaning, pre-spotting & flame retarding; rigging and repairs; and assistance in renovation projects. All treatments follow a strict quality control process - are performed by trained and certified applicators that will issue a Certificate of Flame proofing on completion.

ABOUT ICC-ES

The ICC-ES is a nonprofit, public-benefit corporation that does technical evaluations of building products, components, methods, and materials. For more information, contact:

ICC-ES\5360 Workman Mill Road
Whittier, California 90601
Tel. 562.699.0543
Fax. 562.695.4694
Web www.icc-es.org

PRESS CONTACTS:
Robert Licata, President
Northeast Fireshield, Inc.
Twenty Five Carlough Road
Bohemia, New York 11716
Tel. 631.593.0960
Email: bob@northeastfireshield.com

Inspecta-Shield™ | Advantages | Application Rates | Certificates
Durability | Testing Results | Accreditations | Our Services
Product Sales | Renovation Program | Quality Control
Applicators Program | Clients | Company News
Contact Us | Welcome Page| Important Web Links

---

Produced by Gregory Field for Northeast Fireshield, Inc.
Copyright © 2008 by Northeast Fireshield, Inc. All Rights Reserved.